Showing 10–18 of 54 results
Add On and Build Up Your System
This compact upgrade instantly boosts the power of your system. Easy to install with no additional wiring, it fits neatly behind your head unit.
Kicker’s KXMA800.8 marine 8-channel amplifier will bring brilliance and clarity to your sound, powering eight speakers with 50 watts RMS each. You can also use this amp in a 4-way system, with two channels powering tweeters, two channels powering midrange drivers, two powering mid-bass speakers, and two channels bridged together to power a subwoofer with up to 200 watts RMS. This versatile amp will always find a place in your boat’s sound system, no matter how it evolves over the years.
Stays cool under pressure
This reliable and compact KXM Series rocker will run cool even when pushed hard, thanks to its high-mass heatsink, high-tech internal components, and efficient full-range Class-D amp technology.
Made for marine use
The KXMA800.8 features a conformal-coated circuit board for improved water and dust resistance, plus corrosion-resistant power connections, a gasket-sealed front cover, and stainless steel mounting hardware that won’t rust all over your boat’s gel coat or carpeting.
Kicker employs their Fail-Safe Integration Technology (FIT2™) to reject noise and stop any interference generated by your boat’s electronics, so you’ll enjoy your music clean and pure. Speaker-level inputs make it possible to hook this amp up to almost any stereo receiver or radio. Kicker also helps you set this amp’s gain properly, by offering free test tones for downloading. You play a tone and turn the gain up until the gain knob glows red. Then, you turn it down until it just goes out, and the amp’s gain is set perfectly.
Versatile controls behind the folding door
A gasket-sealed front door gives you quick and easy access to your amp’s controls. You can tune for almost any kind of speaker, as the steeply-sloped high- and low-pass filters offer a wide range of adjustment. The filter sections for the Amp 3 and Amp 4 channels can be set up for bandpass operation — where both the high- and low-pass filters are engaged to allow only the frequencies between them to play — for optimizing the signal for midrange speakers in a 3- or 4-way system.
Looking for strong bass? Kicker’s CXA300.1 mono amp can send up to 300 watts RMS to your subwoofer. You can use the variable low-pass filter to get maximum performance from your sub/enclosure combo, while the fixed subsonic filter removes the extreme low resonances that cause distortion. The variable bass boost allows you to add some low-end punch if you need it. An optional wired remote lets you conveniently adjust the bass level from your front seat.
Hooks in almost anywhere in almost any position
Kicker’s Fail-Safe Integration Technology (FIT™) keeps this amp’s input free from noise or interference, so you can tap into your speaker wires for a signal without a worry. The CXA300.1 comes with hardware that lets you mount it vertically, so you can put it in a location that takes up very little floor space and looks cool too.
Kicker’s DXA250.4 4-channel amplifier will reliably produce great-sounding music, delivering 30 watts RMS to each of your speakers from a very compact chassis that’ll fit in almost any vehicle. This amp delivers around three times the power of a basic factory system, so you’ll add a lot of clarity and punch to your sound. You can also use the front channels on the DXA250.4 to power your front speaker, then bridge the rear channels together to power a subwoofer with 125 watts RMS.
Works with a factory stereo
Kicker’s Fail-Safe Integration Technology (FIT™) allows you to tap into your vehicle’s factory speaker wiring for the amp’s input signals without needing a converter. If your car stereo only has one set of preamp outputs, the DXA250.4 can apply the signal to its other channels to achieve 4-channel play. The “differential-balanced” inputs also help prevent audio interference and noise from entering the system.
Tone controls to help get the job done
The DXA250.4 features separate controls for the front and rear channels so it can work with a variety of different speakers or subs. High-pass filters clear out rumble from small speakers so they can play more efficiently, while low-pass filters adjusts the bass frequencies going to your subs, so they’ll play cleanly. Bass boosts on the front and rear channels add some extra foundation to the sound if you want.
Kicker’s DXA250.1 subwoofer amplifier can put out some great-sounding bass — the kind that grabs your attention and makes listening to music in your car more fun. And this reliable amp delivers up to 250 watts RMS from a compact chassis that’ll fit into a lot of places in your vehicle.
Works with a factory radio
Kicker’s Fail-Safe Integration Technology (FIT™) allows you to tap into your vehicle’s factory speaker wiring for the amp’s input signals without needing a converter. The “differential-balanced” inputs also help prevent audio interference and noise from entering the system.
Controls to help get the job done
The DXA250.1’s low-pass filter adjusts the range of frequencies going to your sub so it can play bass more cleanly and efficiently, while a bass boost can add some extra foundation to the sound if you want. You can add an optional wired remote control to adjust the volume of the bass from your front seat.
Built for Powerful Flexible Sound
The DXA125.2 Stereo Amplifier is built for big sound in a package as powerful as it is flexible.
Power a pair of speakers, or bridge the amp to get a single powerful boost of juice to your subwoofer! An enormous 12dB of variable bass boost with KickEQ™ lets you get even more bass with a simple turn of the knob. A precise crossover is also included, letting you quickly tune your speakers to sonic perfection.
The CXA800.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components.
Great bass requires serious power — it’s a basic law of nature. And Kicker’s KXA1200.1 mono subwoofer amplifier will definitely give you great bass, powering your subs with up to 1,200 watts RMS. This reliable and compact KX Series rocker remains cool even when pushed hard, thanks to its high-mass heatsink, high-tech internal components, and the efficient Class-D amp technology. And the amp will work with a 1-ohm load, so it can get used in a wide variety of subwoofer configurations.
Kicker employs their Fail-Safe Integration Technology (FIT2™) to reject noise and stop any interference generated by your car’s electronics, so you’ll enjoy your music clean and pure. Speaker-level inputs make it possible to hook this amp up to almost any stereo, even a factory system. Kicker also helps you set this amp’s gain properly, by offering free test tones for downloading. You play a tone and turn the gain up until the gain knob glows red. Then, you turn it down until it just goes out, and the amp’s gain is set perfectly.
A KXARC Bluetooth® wireless remote control comes with this amplifier, so no more running a wire from the amp to your remote. From the driver’s seat, you can adjust the level of the subwoofer, add bass using Kicker’s SHOCwave™ bass restorer, switch sub phase, and get a warning when the sub signal clips.
You can tune for almost any enclosure and sub, using the steeply-sloped low-pass and subsonic filters to keep the signal clean. A parametric KickEQ™ lets you choose a bass frequency to boost and also how many notes above and below that center frequency you can boost along with it.
The CXA360.4 Four-Channel Amplifier is built to power all your door speakers in a single, powerful package.
Flexible and Fun
Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Highly efficient heat sinks keep the amp cool with a sophisticated new look, while KICKER’s FIT+™ (Fail-safe Integration Technology-PLUS), gives you outstanding noise rejection – even with premium factory audio systems.
Rayno sits on the board of Directors as a shareholder. He has been with the company since 2003, originally working as an employee in the position of Sales Manager. At that time it was a far smaller enterprise, consisting of 1 branch with 6 staff members. In 2008 the original owner sold the company to the van Heerden family, who officially took over as of May 2008 and have since managed to grow it into what it is today.
Rayno has created and maintained excellent relationships with motor manufacturers.
Thanks to him, Planetworld is a supplier to the likes of Nissan, Suzuki, Mitsubishi, Ford, Subaru, Datsun, KIA, Haval and Toyota to mention a few. Along with his team, Rayno sources products then, working closely with the manufacturer, helps develop and customise them to suit the South African market. To date, he has created inhouse brands – OneNav, Planet Multimedia, Smart Mirror and TyreTech.
Rayno credits his obsession with service and his dedication to customer satisfaction to his 15-year career as a waiter. He’s always had an adventurous side enjoying hobbies such as hang gliding, skateboarding, surfing and trail running. As per family tradition, Rayno loves his music and plays a number of instruments, even having composed a few of his own original songs.