Showing 1–9 of 39 results
The M&K Sound BMC-1 is a balanced, line-level studio bass management controller intended for use with M&K Sounds line of professional studio monitors and with high-end home theater installations. Although the BMC-1 was primarily designed for monitoring 5.1 audio, its flexible architecture allows it to be used for monitoring mono, stereo, Dolby Surround, Dolby Digital, DTS and other formats.
The BMC-1 combines several necessary functions in one 19 rack mount 1RU package. Along with bass management and LFE channel control, it also provides individual channel adjustment capability to properly calibrate your entire monitor system.
The controller consists of a series of five high-pass filters (one each for the L, C, R, LS, RS channels) that route high frequency information (above 80Hz) to their appropriate channels amplifier and speaker. Each channel is also routed through a matching 80Hz lowpass filter. This low frequency information is then routed to a summing amplifier, which in turn sends this low frequency information, along with the LFE channel, to two subwoofer outputs.
This is done for two reasons. First, small loudspeakers may not be able to properly reproduce information below 80Hz. This information is therefore summed together and redirected from the individual channels to a loudspeaker that can reproduce this low frequency information with clarity and power “ a subwoofer. With the introduction of digital audio, it has become necessary for loudspeaker systems to be able to accurately reproduce audio that has a bandwidth of 20Hz to 20kHz with wide dynamics. A satellite/subwoofer system is the best way to accomplish this.
Secondly, todays home theater receivers utilize bass management per Dolby requirements. In order for work done in the studio to translate properly, the mixer must hear his mix exactly the way it will ultimately be played back. The BMC-1 together with a properly set-up and calibrated M&K Sound monitor system allows the mixer to hear his work with more accuracy than might otherwise be possible.
Front Panel Trim Controls +/- 12dB trim control for balancing the system.
The MPS2520P studio monitor are featured with a total of 5 loudspeaker units providing impressive sound impact in an ultra-compact format.
The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.
The 5.25” bass-midrange drivers are tuned for sealed box with 0.707 box Q to provide an absolute optimal system step response control. Combined with triple stacked tweeters operating down to 1.2Khz, makes the MPS2520P sound response become fast and sharp, with superior qualities to control reference recordings, editing, processing, and master mixing for music and movie productions.
MPS2520P are designed for easy system setup using the build in high pass filter for smooth integration with M&K subwoofers.
The MPS 1620P studio monitor feature a long stroke 6.5” driver and a low compression 1” dome tweeter to provide impressive sound impact for high resolution “sound productions”
The MPS1620P can operate both as a sealed or a ported loudspeaker due to the removeable “port plug system” at the rear side of speaker.
When operating with subwoofer, the choice of sealed box configuration and filter set to “normal” will provide the classic M&K Sound sub/sat crossover configuration, while when using the MPS1620P as a stand-alone monitor, the ported configuration with filter set to “full-range” will extend bass response and provider precise “broad band” response for near field monitor applications.
MPS1620P is a flexible high precision studio monitor to use for reference recordings, editing, processing, and master mixing for music and movie productions.
Featured with dual Push Pull coupled long stroke 10” drivers in sealed enclosure.
Combining digital switch mode power section of 350 watt RMS, with M&K propietary analog “front-end” input stage, all designed for the legendary M&K Sound bass extension.
The M&K X10 subwoofer offer very low distortion and high dynamic performance, as using “dual Push Pull coupled drivers” providing a total surface area most equivalent to a single 15” driver.
X10 is multible rewarded for high quality performance in music and movie production, and Home Theater applications.
Featured with dual Push Pull coupled long stroke 12” drivers in sealed enclosure.
Combining digital switch mode power section of 400 watt RMS, with M&K propietary analog “front-end” input stage, all designed for the legendary M&K Sound bass extension.
The M&K X12 subwoofer offer Ultra low distortion and the highest dynamic performance, as using “dual Push Pull coupled drivers” providing a total surface area most equivalent to a single 18” driver.
X12 is rewarded with “reference status” for music and movie production,and Home Theater applications.
Featured with dual Push Pull coupled long stroke 8” drivers in sealed enclosure.
Combining digital switch mode power section of 300 watt RMS, with M&K proprietary analog “front-end” input stage, all designed for the legendary M&K Sound bass extension.
The M&K X8 subwoofer offer the Push Pull technology in a compact size, performing with remarkable low distortion and extended dynamic range. The Push Pull coupled 8” drivers” provide a total surface area most equivalent to a single 12” driver.
Miller & Kreisel Movie 7.2 system saves on space, not on SOUND.
Miller & Kreisel Movie 5.1 system saves on space, not on SOUND.
M&K Sound invented the Tripole® speaker configuration to do what no conventional surround loudspeaker can do. The installation of side and/or rear mounted S300T’s enhances the solidity and pin-point placement of rear channel events such as fly-overs, voices, effects, music etc., as well as the realism of the ambient soundfield.
The S300T Tripole® with integral wall-mount bracket, employs the same front drivers and crossover technology as the S300, for a perfect acoustic match.
Independent, isolated side chambers house two 4” drivers per side for optimal surround coverage that rivals the huge array of speakers required in movie theaters.
Rayno sits on the board of Directors as a shareholder. He has been with the company since 2003, originally working as an employee in the position of Sales Manager. At that time it was a far smaller enterprise, consisting of 1 branch with 6 staff members. In 2008 the original owner sold the company to the van Heerden family, who officially took over as of May 2008 and have since managed to grow it into what it is today.
Rayno has created and maintained excellent relationships with motor manufacturers.
Thanks to him, Planetworld is a supplier to the likes of Nissan, Suzuki, Mitsubishi, Ford, Subaru, Datsun, KIA, Haval and Toyota to mention a few. Along with his team, Rayno sources products then, working closely with the manufacturer, helps develop and customise them to suit the South African market. To date, he has created inhouse brands – OneNav, Planet Multimedia, Smart Mirror and TyreTech.
Rayno credits his obsession with service and his dedication to customer satisfaction to his 15-year career as a waiter. He’s always had an adventurous side enjoying hobbies such as hang gliding, skateboarding, surfing and trail running. As per family tradition, Rayno loves his music and plays a number of instruments, even having composed a few of his own original songs.